Red light alarm on aerobic septic system8/17/2023 ![]() ![]() A high level alarm will not indicate when a tank needs pumping, and while pumping the tank out may resolve the alarm in the short term, once the tank fills back up the alarm is likely to re-occur because the main problem with the system has not been resolved. If the septic tank does not have a submersible pump, the other cause of high water level would be a plugged outlet line or a failed leach field.Ī common misconception is that a high level alarm on a septic tank indicates that the tank needs pumped out. The outlet line is plugged or the leach field has failed.The failure of a submersible pump or float switch will cause a high water level in the pump tank and the septic tank. A submersible pump is used in instances when the septic tank cannot gravity feed to the secondary treatment system. Not all conventional septic tank systems will require a submersible pump but some may have one. The submersible pump has failed or the float that controls the submersible pump has failed.If the filter becomes clogged with solids, it will slow the flow of water leaving the system causing the water level in the septic tank to raise. ![]() This filter should be cleaned approximately every 6 months. Many conventional septic tank systems have an effluent filter on the discharge of the tank.
0 Comments
Leave a Reply.AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |